From €57,00
In stock (can be backordered)
In stock (can be backordered)
Handlebar riser clamp navigation platform that creates an AMPS mounting base directly over your top triple clamp. Positions navigation cradles and phones cleanly in your forward line of sight without taking up handlebar space.
• AMPS Platform: Multi-pattern 30 × 38 mm layout supporting portrait and landscape orientations
• Bike Compatibility: Fits most KTM light enduro and adventure models (plus clamps matching gallery hole spacing)
• Hardware Included: 4× M8×40 bolts, 4× CNC stand-offs, and complete M4 hardware pack for Lightweight Holder
• Modular Option: Optional M4 adapter plate can be included for Carpe Iter Lightweight Holder or removed for standard cradles
• Curated Accessory: Manufactured by NiceCNC, offered by Carpe Iter for complete one-stop cockpit setups
Center Cockpit AMPS Platform for Handlebar Riser Clamps.
The GPS Bracket for Handlebar Clamp creates a rock-solid, centered AMPS mounting station directly atop your motorcycle’s existing handlebar clamps. By utilizing the upper clamp pinch bolts, it positions navigation tablets, smartphones, and roadbooks in an ideal line-of-sight orientation without crowding hand controls, mirrors, or switchgear on the handlebar tubing.
The top platform features a universal 30 × 38 mm AMPS hole pattern drilled for M4 hardware, supporting both landscape and portrait device orientations. It is directly compatible with the Carpe Iter Lightweight Holder (via the included M4 adapter plate) as well as third-party GPS cradles.
Bike Compatibility Note: Fits most KTM motorcycles—including both EXC/FE light enduros and larger Adventure models—as well as any motorcycle whose handlebar clamp bolt spacing matches the dimensions shown in the picture gallery.
The provided CNC-machined stand-offs MUST be installed between the bracket base plate and the handlebar clamp. They ensure the base plate does not press directly flat against the clamp body. Omitting these stand-offs will prevent the mounting screws from properly torquing down, resulting in:
Always torque all M8 handlebar clamp bolts to the exact torque specification prescribed by your motorcycle manufacturer before completing the upper assembly.
Remove OEM screws from your motorcycle’s handlebar clamp. Disassemble the base plates from the pre-assembled bracket. Install the base plates together with the 4× CNC stand-offs on top of the handlebar clamps using the provided M8×40 bolts. Torque all M8 bolts to your motorcycle manufacturer’s prescribed value (these bolts cannot be easily re-torqued after full assembly).
Unscrew and remove the top mounting plate from the main bracket riser body to allow access to lower attachment hardware.
Mount the main body of the bracket securely onto the torqued lower base plates using the assembly hardware.
Install the Carpe Iter Lightweight Holder (or alternative AMPS cradle) onto the detached top bracket plate using the supplied M4 hardware pack.
Install the top plate assembly back onto the main bracket body. Align all components, adjust viewing angle to your seated/standing riding posture, and firmly tighten all bracket adjustment fasteners.
| Product Function | Handlebar riser clamp AMPS navigation platform |
|---|---|
| Hole Pattern Standard | AMPS 30 × 38 mm (portrait and landscape orientations supported) |
| Hole Diameter / Thread | Drilled for M4 hardware (M4 adapter plate included for Lightweight Holder) |
| Motorcycle Fitment | Most KTM enduro (EXC) and adventure models; bikes matching gallery clamp dimensions |
| Included Clamp Fasteners | 4× M8 × 40 mm bolts and 4× CNC-machined cylindrical stand-offs |
| Included Adapter Fasteners | 4× M4 × 14 mm screws, 4× M4 nuts, 8× M4 washers |
| Manufacturer | NiceCNC (curated and distributed by Carpe Iter) |
