$3.55 excl. VAT

Power Cable for Caretta Cradle – KTM/Husqvarna

Plug-and-Play ACC Power Cable for Caretta Cradle – KTM & Husqvarna

Dedicated cockpit power harness engineered to connect the Caretta Cradle directly to factory ACC power outlets behind the headlight mask on KTM and Husqvarna motorcycles.

Provides a clean, OEM-grade electrical connection without slicing or soldering factory wiring. Terminated with standard 6.3 mm female Faston spades (TE Faston 250 compatible) to plug straight into switched auxiliary leads behind your headlight cowl.

Specifications & Compatibility:

  • Bike Compatibility: KTM and Husqvarna adventure and enduro models with ACC accessory spade terminals under the mask.
  • Connector Standard: 6.3 mm Faston females (TE Faston 250 compatible).
  • Target Harness Length: 450 mm lead for tidy routing behind the headlight assembly.
  • Direct Integration: Engineered specifically to power the Caretta Cradle.

In stock (can be backordered)

[ APPLICATION_DATA // POWER HARNESS ]
CARPE ITER OEM

Dedicated Plug-and-Play Switched 12V Power Cable for KTM & Husqvarna Cockpits.

Designed specifically for the Caretta Cradle and KTM and Husqvarna adventure/enduro motorcycles equipped with factory auxiliary power (ACC) leads tucked behind the headlight mask.

This harness directly interfaces with the factory 6.3 mm spade auxiliary wiring, eliminating standalone battery runs. Connecting to the bike’s key-switched ACC port (typically marked ACC2 on KTM/Husqvarna harnesses) delivers clean 12V power that activates and cuts off automatically with the motorcycle’s ignition to preserve battery charge.

HARDWARE CAPABILITIES & ROUTING PROFILE
  • ■
    Direct OEM ACC Fitment: Terminated on the bike side with pre-crimped 6.3 mm Faston female connectors (TE Faston 250 compatible) designed to push straight onto the factory spade ACC leads behind the headlight mask.
  • ■
    Clean Mask-to-Cockpit Run: At approximately 450 mm, the harness provides a clean path from behind the front headlight shell up to the handlebar or rally tower GPS bar without excess wire bulk.
  • ■
    Durable Weatherproof Jacket: Shielded multi-core wiring engineered to resist steering head movement, vibration, and outdoor elements.

FITMENT & SHIPPING NOTICE
* Designed specifically for KTM and Husqvarna models with accessible ACC leads under the front headlight mask (such as 390/790/890/1090/1190/1290 Adventure, 690 Enduro, Husqvarna 701 Enduro, and Norden 901).
* Pre-orders will ship together with Caretta Kits and Caretta Cradle.
STANDARD: TE FASTON 250 // 6.3MM ACC LEADS
VALIDATION: CARPE ITER CERTIFIED

[ PHYSICAL_PARAMETERS // SPECS ]
WIRING HARNESS
Bike-Side Connector6.3 mm Faston female spade terminals (TE Faston 250 compatible)
Cradle-Side ConnectorDedicated quick-connect multi-pin plug for Carpe Iter Caretta Cradle
Cable LengthApprox. 450 mm (TBC)
Operating Voltage12V DC vehicle switched circuit
Primary Motorcycle TargetsKTM and Husqvarna motorcycles with factory front mask ACC wiring (790/890/1290 Adv, 690/701 Enduro, Norden 901)
CIRCUIT: SWITCHED 12V // HEADLIGHT MASK ACC
VALIDATION: CARPE ITER CERTIFIED
[SELECT STATION FEED]
Power Cable for Caretta Cradle - KTM/Husqvarna
Power Cable for Caretta Cradle - KTM/Husqvarna
Power Cable for Caretta Cradle - KTM/Husqvarna
Power Cable for Caretta Cradle - KTM/Husqvarna
[ PRODUCT_MEDIA_STAGE ]
Power Cable for Caretta Cradle - KTM/Husqvarna
Discover more on our Official channel @carpeiterNavigation
Explore the product manuals, wiring guides, and setup documentation below to get the most out of your gear.
Need extra help or looking for deeper technical guides?
Visit our CarpeIter Knowledge Base
Ridden with this gear on the trail?
Share your real-world setup photos and field reports on the Tribe forum.

[RELATED HARDWARE]