From $217.35

Terrain Command Rally Kit

Digital-to-Analog Rally Navigation Bridge & Switch Interface

Bridge traditional rally hardware with modern digital navigation. Connect standard analog rally controls directly into the Terrain Command system to drive digital roadbook tablets.

Rally-proven controls belong in rally cockpits. This kit lets you run tactile, bulletproof switches—fully compatible with ICO Racing tripmasters and F2R electric roadbook holders—straight into Android navigation apps. No touchscreen fiddling at 120 km/h across the dunes.

Cockpit Configurations:

  • Config A (Hybrid Master): ICO/roadbook toggle in BTN1 for roadbook scroll, and our standard Terrain Command Buttons in BTN2 for map zoom and panning.
  • Config B (Pure Rally Duo): Roadbook toggle in BTN1 and multi-button ICO switch in BTN2 for dual tripmaster setups (requires 2× Signal Splitters).
  • Config C (Minimalist): Roadbook toggle in BTN1 with BTN2 left open for the slimmest possible racing setup.
  • Hardware Note: ICO buttons and motorized roadbook toggles are not included. If you already own a Terrain Command, grab the standalone Signal Splitter.
Terrain Command III Hub
1 × Terrain Command III Hub
Original price was: $142.60.Current price is: $128.34.

In stock (can be backordered)

Signal Splitter - Terrain Command
1 × Signal Splitter - Terrain Command
Original price was: $10.35.Current price is: $9.32.

In stock (can be backordered)

Terrain Command Buttons - Glass-filled Nylon
Terrain Command Buttons - Glass-filled Nylon
Original price was: $64.40.Current price is: $57.96.

In stock (can be backordered)

-
+

[ APPLICATION_DATA // RALLY NAVIGATION ]
TERRAIN COMMAND RALLY KIT

Digital-to-Analog Cockpit Bridge for Professional Rally Raid & Roadbook Setups.

The Terrain Command Rally Kit bridges the gap between traditional mechanical rally navigation controls and modern digital tablets. By leveraging the modular architecture of the Terrain Command system, it allows riders to connect standard analog rally switchgear—specifically controls compatible with ICO Racing tripmasters and F2R electric roadbook holders—directly into an Android navigation platform.

Whether you are transitioning an existing rally bike to digital roadbooks or running a hybrid setup with physical switches driving digital software, this kit processes tactile rally switch inputs into low-latency Bluetooth commands managed by Carpe Iter Next-gen HUD (NGH).

SUPPORTED COCKPIT CONFIGURATIONS
  • ■
    Configuration A (Hybrid Rally / Map Setup): Connect an ICO / motorized roadbook toggle switch to port BTN1 on the Terrain Command Hub, and connect the standard Carpe Iter push-button module to port BTN2. This provides mechanical roadbook scroll/step on one side and full digital map zoom/panning on the other.
  • ■
    Configuration B (Dual Traditional Rally Switchgear): Connect an ICO / roadbook toggle switch to BTN1 and a secondary multi-button ICO switch to BTN2 (omitting standard Carpe Iter buttons). Supports dual tripmaster configurations using 2× Signal Splitter adapter cables.
  • ■
    Configuration C (Minimalist Roadbook Setup): Connect an ICO / roadbook toggle to BTN1 with port BTN2 left unused for the slimmest possible cockpit footprint.

SOFTWARE REQUIREMENTS & ACCESSORY NOTICE
* External Switchgear: Physical ICO push-buttons and F2R electric roadbook toggles are not included with this kit.
* Software Requirements: Minimum required companion software versions: Carpe Controller app v2.86 for Terrain Command III (or v2.87 for Terrain Command II), or the latest release of Carpe Iter NGH.
* Existing Owners: If you already possess a Terrain Command unit and only require the ICO / roadbook breakout harness, order the standalone Signal Splitter for Terrain Command II and III.
COMPATIBILITY: ICO TRIPMASTER // F2R ROADBOOK // TC3 HUB
VALIDATION: CARPE ITER RALLY SPEC

[ PHYSICAL_PARAMETERS // SPECS ]
RALLY CONTROLLER SPEC
Product ClassificationModular Analog-to-Digital Rally Navigation Controller Kit
Analog Device CompatibilityStandard 3-button ICO tripmaster switches, F2R motorized roadbook toggles
Controller Hub ArchitectureDual-channel button input ports (BTN1 & BTN2) with Hall sensor input
Wireless ConnectivityBluetooth Low Energy (BLE 5.0)
Operating Voltage12V DC nominal (motorcycle electrical system powered)
Enclosure ProtectionIP68 (fully encapsulated electronics against water, mud, and dust)
Supported Software EcosystemCarpe Iter NGH, Rally Roadbook Reader, Piste Roadbook Reader, Terrapirata, DMD2
CHANNELS: DUAL BTN INPUTS // SPLITTER ADAPTER
VALIDATION: CARPE ITER CERTIFIED
[SELECT STATION FEED]
Terrain Command Rally Kit
Terrain Command Rally Kit
Terrain Command Rally Kit
Terrain Command Rally Kit
Terrain Command Rally Kit
[ PRODUCT_MEDIA_STAGE ]
Terrain Command Rally Kit
Discover more on our Official channel @carpeiterNavigation
Ridden with this gear on the trail?
Share your real-world setup photos and field reports on the Tribe forum.

[RELATED HARDWARE]